Specifying Western Red Cedar Board-and-Batten Siding
The following information is required when specifying
board-and-batten siding products:
| Specification Information
Required | Sample
Specification |
| Species: Western Red Cedar | WRCLA Western Red Cedar |
| Product Pattern and Intended Use: Siding is used as an exterior cladding to provide both weather protection and architectural style. The designer may choose from clear or knotty, kiln-dried or green (unseasoned), rough sawn or surfaced on one side and two edges (S1S2E).
| S1S2E Boards |
| Size:
Specify the nominal size of
the product. | 1 x 3 in. Battens
1 x 10 in. Boards |
| Grade:
The grade of the product
governs its overall quality.
Refer to WRCLA specification
literature or grading agency
rule books for available grades. | A and Better |
| Grading Agency Paragraph:
To ensure that the product
meets a written standard,
an agency grade paragraph
should be referenced. | NLGA para. 200a, b |
| Moisture Content:
Specify whether the product
is to be green (unseasoned)
or kiln-dried. | Kiln-dried |
| Surface to be exposed:
Specify the application
orientation to assist the
supplier in shipping the
right product for the job. | Sawn face |
| Quantity: Express in linear feet | 10,000 linear feet
1 x 3 in.
10,000 linear feet
1 x 10 in. |