Grades of Western Red Cedar Bevel Siding

WRCLA Cedar Siding

Clear Grades of Western Red Cedar Bevel Siding

Clear bevel siding is graded for smooth face use with the exception of Rustic which is graded for saw textured use only.

Grade Description Grading Rule Paragraph1
CLEAR VERTICAL GRAIN HEART*

This is the highest bevel siding grade. All Clear V.G. Heart grade is sawn vertical grain (edge grain) and is kiln-dried. Pieces have a smooth face of decay-resistant heartwood and are free from growth characteristics that affect appearance or performance. Pieces have excellent dimensional stability and hold finishes exceptionally well.

*Available solid wood or finger-joined
NLGA 201a
WCLIB 106-aa
A CLEAR*

This is a fine appearance grade that allows only slightly more growth characteristics than Clear Heart. Pieces are of mixed grain. These mixed grain (vertical and flat) pieces are graded from the surfaced face. Typically sold with a percentage of B grade

*Available solid wood or finger-joined
NLGA 201b
WCLIB 106-a
RUSTIC*

Rustic grade bevel siding is recommended for use as sidewall covering where the distinctive charm of a rustic saw textured appearance is desired. This grade allows limited characteristics that do not detract from serviceability.

*Available solid wood or finger-joined

NLGA 201d
WCLIB N/A


 

Knotty Grades of Western Red Cedar Bevel Siding

Grade Description Grading Rule Paragraph1
SELECT KNOTTY

Knots and other natural features define the visual character of knotty sidings. In Select Knotty grade, knots are sound and tight. Available rough or dressed, kiln-dried or unseasoned and smooth or saw textured. Some companies may supply this grade with knots glued on the reverse face. sold with Typically a percentage of Quality Knotty grade (NLGA 205b/WCLIB 111-f). NLGA 205a
WCLIB 111-e
ARCHITECT KNOTTY®

This product is intended to be fully usable with the resawn face exposed to after trimming to fit the stud wall spacing. Contains no open characteristics or through defects.The product allows the use of adhesives on the reverse face to secure knots. Architect Knotty® is particularly well suited for factory priming or finishing. Supplied kiln-dried.

®Architect Knotty is a registered trademark of the WRCLA
Proprietary WRCLA

1NLGA – National Lumber Grades Authority
WCLIB – West Coast Lumber Inspection Bureau